Submitted by Administrator on Wed, 11/27/2013 - 21:52
Unfortunately it's not practical to stock the appropriate AC power supply for each country, and even if this was possible then shipping the power supply with the pedal would add significantly to the cost because of the extra weight. You will need to source your own power supply if you purchase either of these pedals.
Submitted by Administrator on Sun, 11/11/2012 - 09:04
You can use either an expression pedal OR a volume pedal - with the volume pedal, simply connect a 1/4" cable between the 'output' and the socket on the infinitphase. Note that when using the speed control in this manner, the 'rate' control on the infinitphase determines the maximum rate, and then the pedal is used to 'slow down' the LFO pedal from this maximum rate.
Submitted by Administrator on Sun, 11/11/2012 - 09:03
The best way to experiment with the phase sequence controls is to set the LFO to a triangle shape (LEDs panning back and forth), symmetry at 12 o'clock, rate slowish (around 9 o'clock) then turn the 'range' control down until only 3 LEDs are being illuminated in time with the LFO shape. Then you can play with the phase sequence controls and more easily notice they affect he sound. Or better still, turn the 'range' control right down until only one LED is illuminated (the middle one of the nine) then adjust that control only.
